News / Events

November 2017

October 2017

September 2017

July 2016

CONDUIT TYPE LTP COMPLIES WITH REQUIREMENTS UNI CEI EN 45545-2 FOR HAZARD LEVELS HLI/HL2/HL3

The conduit type LTP is enhanced fire retarded combined with an excellent mechanical protection strength. Due to the fire security performance these conduits are preferably used in transportation applications at passenger zones of train cars, ships, buses and public buildings.

http://www.teaflex.com/Images/Newsletter/LTP_RWY.pdf

JAW-FIT FITTINGS: NEW CERTIFICATION IP69K

JAW-FIT FITTINGS HAVE OBTAINED MAXIMUM DEGREE OF WATER PROTECTION WHEN CLEANING HIGH PRESSURE / STEAM JET (TEST: PRESSURIZED HOT WATER IS SPRAYED FROM A DISTANCE OF 150 MM). WATER PRESSURE 100 BAR; TEMPERATURE 80 ° C; TEST DURATION 250 SECONDS

http://www.teaflex.com/Pdf/Support/Gamma_JAW.pdf

April 2015

SFMIL

In line with our policy of customer focus, we have implemented the range of the fittings:SFMIL female adapter SF type with UNEF plastic thread designed for adaptation to MIL-DTL-5015 electrical connectors

June 2014

New catalogues in download area

INDUSTRIAL INSTALLATION, STAINLESS STEEL, ATEX, POLYAMIDE, RAILWAY, EMC

SVPEVA and SVPEVAT conduits LR4 classified for UNI CEI 11170-3

The best classification in Italy for use in railway sector

DIN 5510-2 on LTP conduit and JAW-FIT fittings

with an excellent classification: S4/SR2/ST2

Attestation of conformity issued from TUV Sud concerning JAW-FIT series (PA fittings)

The fitting-conduit side has an IP rating=IP68 (performed at 5 bar for 30')

Gost-R approval

on plastic conduits and fittings too

RLTP conduit (PA12)

It has been certified according to European, Italian, French and German RAILWAY regulations

new flags

Our web pages are also available in Polish and Russian

EN45545-2 approval on RLTP conduit for railway sector

HL2 category

The LTP conduit has been certified LR4 for the UNI CEI 11170-3

the Italian approval for railway sector

JAW fittings straight (SM), 90° elbow (BN) and 45° elbow (BF) are cULus LISTED

IP68, male NPT, ISO, PG thread, diameters 17-48 (ask for relevant data sheet to our Marketing)

Internal laboratory for Quality Control and R&D

ask for relevant introduction

RLTP and PEV0 conduits LR4 classified for UNI CEI 11170-3

The best classification in Italy for use in railway sector

CAD drawings

We have activated a restricted area with IGES and STEP files

DIN 5510-2 (S4, SR2, ST2) on SMP and RWP conduits

Ask for details to our Marketing Dep.